Tsugami Sync Editor (preview)

KoriWareTsugami Sync Editor (preview)BW209Z · 3 heads · Fanuc 31i-B Heads in use this session

Waits

All-head wait (P7)

Partial wait (P5 = Heads 1+3)

Wait problem

Superposition M741…M740

Composite M765…M764

Pinch G121/G131…G120/G130

Codes: known · likely · unconfirmed · unknown
Hover a code to see what it means.

Errors & warnings

Drop the Head 1 / Head 2 / Head 3 .nc files

Which head is each file?

Help

The editor checks the wait codes, links (superposition, composite, pinch) and common code mistakes across Heads 1–3 against the Tsugami guide's codes (Settings). The sim is a 2D estimate of tool tips only: not a collision check, times are estimates. A clean result never means the program is safe. Prove out on the machine.

Alarms: these are Fanuc control (CNC) alarms predicted from the code, not Tsugami machine (ladder / EX) alarms. Alarm numbers are shown only where a source gives them (the Fanuc 0i-TC manual, the Series 30i/31i-A alarm list B-63945EN) and are not confirmed for the 31i-B. The machine's own alarm list wins.

Not checked (check these yourself):

Which head owns tools T31–T38 (tool ownership per head is not checked).
G28 / homing on all three heads at once.
Collisions of any kind: holders, gang plates, guide bushing (the sim shows tool tips only).
In the sim: tip directions T1–T8 and nose-radius comp during G71–G73 roughing are flagged, not modelled.

Keys: F8 / Shift+F8 next / previous wait · in the sim: Space play, N / Shift+N next / previous wait, ← → step one block, Esc leaves Sim view.

Settings

Code numbers differ between Tsugami models. Defaults come from Tsugami Three Path Programming Rev 041523; change them to match your manual. Saved in this browser.

All settings in one fileEditor settings, your Machine setup (with its ticks) and the sim layout. Stays on this computer.

Import all settings

Machine setup for the simulation

Values come from Tsugami's published BW209Z specs or are labeled stand-ins. Nothing is confirmed until you tick it. Time estimates stay hidden until every required value (★) is confirmed. Saved in this browser only.